Dynalink RTA770W Einstellungsanleitung PDF herunterladen (Seite 6)

Windows 98/ME:

1. From Control Panel, double click

Network. Scroll down to highlight

TCP/IP -> (your network card). Click

Properties.

2. Select the IP Address tab. Specify

192.168.1.x (x is a number you pick

between 2 and 254). This is the IP

address you assign to the computer.

Subnet Mask is 255.255.255.0.

3. Select Gateway tab. Enter the

router’s IP address 192.168.1.1.

Click Add. If your ISP specifies DNS

server addresses, go to the tab DNS

Configuration. Enter the specified

addresses according to the ISP’s

instructions.

4. Click OK & then OK to finish. The

system may ask to read the

Windows CD, and then ask to restart the computer.

You have now finished with configuring your computer.

Go to Section 5 – Getting On-line.

Getting On-line It takes only 2 easy steps.

STEP1 GO TO THE ‘CONNECT TO INTERNET’ PAGE

Start your web browser. Enter the default

address http://192.168.1.1. Type admin

for both User name and Password.

See Q1 in Section 10 - Troubleshooting

if you cannot get this screen.

Next you will be in the Quick Start >

Connect to Internet page.

If your ISP specifies that your ADSL

service is PPPoE, you must now follow

Section 6 to change the router’s

connect mode to PPPoE. Check with

your ISP if you are unsure of the type of service you have subscribed to.

ADSL Router Quick Set-up Guide

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Keine Kommentare

Dynalink RTA770W Einstellungsanleitung Seite 6