Dynalink RTA1335 Betriebsanweisung PDF herunterladen (Seite 10)

Installation CD-ROM you have received in the

self-install kit. If you need assistance for setting

up your wireless network, you can contact

Dynalink.

1. Plug one end of the Ethernet cable into the

socket marked Ethernet on the back of the

modem (See Fig. 1). The other end of the

cable is plugged into the Ethernet socket of

your computer.

2. Plug one end of Phone Cable 1 into the

socket marked DSL on the back of the

modem (See Fig. 1). The other end of the

cable is plugged in to the socket marked

DSL on the ADSL line filter.

3. Plug the power adaptor into the PWR

socket on the back of the modem (See Fig.

1). Plug the other end of the power adaptor

into the wall socket.

4. Turn on the power on at the wall socket.

Turn on the modem using the power switch

(See Fig. 1).

6. Turn on your computer.

7. Open your internet browser (e.g. Internet

Explorer) and enter the address

http://192.168.1.1 in the web address bar.

8. Enter the username Admin and the

password Admin into the dialogue box to

connect to the modem and click on OK

(see fig. 2).

9. The page you will see next is the Connect

to Internet page. On this page you enter

your username and password for the

Broadband connection (See fig. 3).

10. Click on Connect. The modem will restart

and connect to Broadband.

1 2 ... 5 6 7 8 9 10 11

Keine Kommentare

Dynalink RTA1335 Betriebsanweisung Seite 10