Dynalink RTA1025W Einstellungsanleitung PDF herunterladen (Seite 4)

Step 2: Configuring your wireless settings:

Please ensure that your modem/router is connected to your computer using an

ethernet cable before continuing.

Troubleshooting Tip

After logging into your router, verify the following settings to troubleshoot issues with your wireless connection:

- Wireless MAC filtering is

disabled.

- Your SSID is

not hidden.

- Confirm your wireless security settings

(Make sure you are using the correct wireless security key).

- Confirm your selected wireless security is supported by your wireless device.

1. Open your web browser and go to the address http://192.168.1.1, using admin as the

username and password when prompted.

2. Select "

Wireless" from the menu at the top of the page and then “Basic Settings”

from the menu on the lefthand side.

3. Make sure “

Enable Wireless Network” is TICKED.

4. Make sure “Hide Wireless Main Network” is UNTICKED.

5. The default SSID should be "RTA1025W" with 6 letters and/or numbers after it.

(You can change this if desired. Please make a note of the changed SSID, as this will be the

name of your network, and will be used to connect to the wireless connection in a later step.)

If you have changed any settings on this page, click the Apply button at the bottom of

the page.

1 2 3 4 5 6 7 8 9 ... 31 32

Keine Kommentare

Dynalink RTA1025W Einstellungsanleitung Seite 4